Come doppiare le carte standard con Super Series Red e White
By KMC Sleeves USA | Published: 2026-10-20
Category: Guide pratiche
Impara la corretta tecnica di doppia protezione per carte di formato standard con le buste KMC Super Series Red e White, con istruzioni passo passo e gli errori comuni da evitare.
Quick Answer
To double sleeve standard cards, use KMC Super Series Red or White as your outer sleeve and pair them with a snug inner sleeve, inserting the card carefully to avoid air bubbles and creases.
Why Double Sleeving Matters
Double sleeving adds an extra layer of protection against moisture, dirt, and wear. The outer sleeve takes the brunt of shuffling and handling, while the inner sleeve keeps the card itself pristine.
KMC Super Series Red and White sleeves are designed for everyday use, with a smooth back that makes shuffling easier even when double sleeved.
Choosing the Right Sleeves
Both Super Series Red and White are standard size sleeves (92mm x 66mm) with a thickness of .10mm, so they fit standard cards perfectly. The choice between red and white is mostly about personal preference and table visibility.
For double sleeving, you'll also need a smaller inner sleeve (often called perfect fit) that fits snugly around the card. The outer sleeve should be slightly larger to accommodate both the card and the inner sleeve.
Step-by-Step Double Sleeving Process
- Step 1: Prepare Your Workspace: Clean, flat surface with good lighting. Have your inner sleeves, outer sleeves (Super Series Red or White), and cards ready. Check that your hands are dry and clean to avoid transferring oils to the sleeves.
- Step 2: Insert the Card into the Inner Sleeve: Slide the card into the inner sleeve from the bottom (the open end). Align the edges carefully to avoid bending the card. Ensure the card is fully seated in the inner sleeve before moving to the next step.
- Step 3: Place the Inner-Sleeved Card into the Outer Sleeve: Hold the outer sleeve (Super Series) open and gently slide the inner-sleeved card in from the top. The open ends of both sleeves should face the same direction to keep out dust. If the card slides in too tightly, check that the inner sleeve is not wrinkled or misaligned.
- Step 4: Smooth Out Air Bubbles: Press down gently on the sleeve from the center outward to push out trapped air. Use a soft cloth or your thumb to flatten the surface. Avoid pressing too hard, which could crease the card or sleeve.
- Step 5: Test the Fit and Shuffle: Once sleeved, test a few cards in your deck. The sleeves should shuffle smoothly without sticking. If shuffling feels sticky, the sleeves may need a short break-in period; shuffle gently until they loosen up.
Product Facts
- Super Series Red: Super Series Red sleeves are higher gloss with a smooth back, sized 92mm x 66mm, and pack 80 sleeves per pack. The smooth back reduces friction during shuffling, and the higher gloss provides a clear view of your card while protecting it.
Super Series Red - Super Series White: Super Series White sleeves also feature a higher gloss and smooth back, with the same 92mm x 66mm size and .10mm thickness. White sleeves offer a bright, clean look that can make card art stand out, while still providing durable everyday protection.
Super Series White
